Cryolipolysis+lipo laser machine
2 in 1 650nm diode lipo laser
Combine two advanced weight lose technology:cryolipolysis and lipo
laser.It is effective to treat
stubborn fat such as fat on belly,back,lovehandles by
cryolipolysis,while lose fat on arms and thighs.
Three kinds of language,English,Spanish,French
Total 32 diodes
Cooling output temperature
-16°C ~5 °C
pure water, with 4litres
LED Light wave length
8 inch Monochrome touch screen
Cryolipolysis cool shape machine is a new, non-invasive way to
effectively reduce fat in targeted areas of the body that results
in a noticeable,
natural-looking fat reduction in the treated areas. Triglyceride in
fats will b
converted into solid in particular low temperatures. What makes the
Cryolipolysis cool shape machine procedure different is that it
cooling technology to selectively target fat bulges and eliminate
through a gradual process that does not harm the surrounding
procedure can reduce unwanted abdominal fat, love handles (flanks),
When fat cells are exposed to precise cooling, they trigger a
process of natural
removal that gradually reduces the thickness of the fat layer. And
the fat cells
in the treated area are gently eliminated through the body’s normal
process, to eliminate unwanted fat.
Throughing the freezing effect, remove the fat cell triglyceride
off heat, and will
remain at 4 °C, so the cold coagulation, and therefore premature
aging and death. Fat cells in the cold, it will start clearing the
natural decomposition process, so that gradually thinner fat layer.
Through the normal metabolic processes, decreasing the fat layer,
to achieve the purpose of partial melting fat.
Fat cells can be significantly reduced, the fat layer also will
become thinner, so that the fat blocks will be killed one by
one.Cooling Skin protection while lifting and tightening.The
contact cooling of the handpiece surface regulates the temperature
of the skin and protects fine dermal structures, realizing the fast
body-reshape effects while tightening skin!
It need fill in 4.5 L water when you start use the machine, the
water tank max with 5.0L water, but we required just 4.5L water.
If you want to transport machine from one office to another office,
you muse be sure to drain out of the water from water tank. Then
fill in with 4.5L water before you use it again.
When you transport the machine from one place to other place, you
must drain the water off from the machine, in the back of machine,
there are three holes, the upper one is for fill in water with a
funnel and pipe, in the middle of machine, there is connector or
hole for overflow water. As long as you fill in 4.5L water, it
won't overflow from the hole. The below of the machine, it is the
hole for drain
off water, you just need open or rive the black screw, the water
will flow out from the machine, or rather from the water tank.
When you press the power button, the machine starts to work,
especially the water pump. Therefore, the machine requires fix the
handle piece before you use it, and also use the four screws to fix
it which we have offered with the machine. Otherwise, the water
will flow out from the machine. Or rather from the two holes which
connect with handle piece. As you see the user manual, there are
three holes and one connector in the handle pieces, two holes are
for water cycle system, one hole is for vacuum, one connect is for
cold and LED function. And also in the machine which connect the
1. One part of a working time between 30 to 50 minutes (depending
on the capacity of the human body set).
2. For the cellulite removal for the parts of body, each time just
can only be for a cellulite removal for one part, regarding the
Cellulite of waist, if you want celluite removal for the whole
waist, it need to receive multiple treatments to complete items for
what your want.
3. Within 2 or 3 months, the same position after accepted the first
course treatment to undergo another course of frozen fat soluble,
it can reduce the extra fat layer thickness, Continue twice
received treatment to dissolve fat plus freezing effect, but
continued to repeat the accepted treatment at random is not
4. The cryolipolysis treatment designed for localized hypertrophic
fat accumulation area, physical healthy people, but not suitable
for Overall obesity. Treatment mainly for a particular part, such
as waist fat, belly and back, and other local cellulite. Treatment
is not omnipotent and can not cure obesity, it can not replace
liposuction or other invasive therapies. A Substantial weight loss
should be through a balanced diet and do regular exercise;
cryolipolysis treatment can only be carried out for extra fat.
Qualified antifreeze should be used during the treatment, to avoid
frostbite when temperature lowers to the 0 to -20 degree.
Consumables, purchase on your own.
1. Check the thickness of the fat
2. Clean treatment area; Clear the hair of the treatment area
3. Mark the size of treatment area
4. Use antifreeze on the treatment area
5. Paste antifreeze membrane at treatment part.
6. Patients receiving the treatment should be sitting Make upper
body and lower limbs to 90 degrees.
7. According to the patient endurance of fat thickness and size
8. The refrigeration device gently dissolve fat absorption
treatment site, press the” START” button.
9. Starts suction instrument itself will remain unchanged.
10.45-55 minutes after treatment with model , press the control
button in the screen, to stop the suction. Then use the other five
with for massage with 5 minutes according to the feeling of clients